LG BC775 - Page 65

65
Serial Communication Function
13. Energy Saving (Command: np)
 Sets energy saving mode.
Transmission
[n][p][][Set ID][][Data][Cr]
Data 00: Minimum
01: Maximum
(* Transmitted in hexadecimal code)
Ack
[p][] [Set ID][][OK][Data][x]
Data 00: Minimum
01: Maximum
14. Auto Congure (Command: ju)
 Optimizes the screen automatically in
PC input mode.
shaking.
Transmission
[j][u][][Set ID][][Data][Cr]
Data 01: To set
(* Transmitted in hexadecimal code)
Ack
[u][] [Set ID][][OK][Data][x]
Data 01: To set
15. Input Select (Command: xb)
 Select the input signal of the set.
Transmission
[x][b][][Set ID][][Data][Cr]
Data 20: External input
40: Component 1
41: Component 2
60: RGB 1
61: RGB 2
90: HDMI
(* Transmitted in hexadecimal code)
Ack
[b][] [Set ID][][OK][Data][x]
Data 20: External input
40: Component 1
41: Component 2
60: RGB 1
61: RGB 2
90: HDMI
(* Transmitted in hexadecimal code)
12. Black Level (Command: nm)
 Adjusts the black level value. Disabled
when Black Mode is selected.
Transmission
[n][m][][Set ID][][Data][Cr]
Data 00: Low 01: High
(* Transmitted in hexadecimal code)
Ack
[m][][Set ID][][OK][Data][x]
Data 00: Low 01: High