Web and Data 107
Wi-Fi Direct
Wi-Fi Direct supports a direct connection between Wi-Fi enabled phones without an access
point. Due to the high battery usage of Wi-Fi direct, it is recommended that you plug your phone
into a power outlet while using the Wi-Fi Direct feature.
To turn on Wi-Fi Direct:
1. Tap > > System settings > Wi-Fi > > Wi-Fi Direct.
2. Tap Search to search for available phones.
3. Tap the available phones.
Note: Tap > Help for more information.
4G
4G provides your phone with wireless Internet access over greater distances than Wi-Fi and
delivers data transfer rates of up to 30 Mbps. To connect your phone to 4G network, you need
access to a 4G base station.
For more information about the availability of 4G in your location, visit sprint.com/coverage.
Note: The availability and range of the 4G network depends on a number of factors including
your distance to the 4G base station, and infrastructure and other objects through which the
signal passes.
Turn 4G On and Connect to the 4G Network
1. Touch > > System settings > More... > Mobile networks > Network
mode.
2. Select LTE/CDMA. The phone will scan for the 4G network and will automatically
connect to it.
When your phone is connected to the 4G network, the 4G icon ( ) appears in the Status
Bar and tells you the approximate signal strength (number of bands displayed).
Note: The 4G network is self-discoverable, which means no additional steps are required for
your phone to connect to it.
Check 4G Network Status
1. Touch > > System settings > More... > Mobile networks.
2. Touch 4G settings. The network provider name and IP address are displayed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
