Tools and Calendar 154
Note: Due to different specifications and features of other Bluetooth-compatible phones, display
and operations may be different, and functions such as transfer or exchange may not be
possible with all Bluetooth compatible phones.
Pairing between two Bluetooth phones is a one-time process. Once a pairing has been created,
the phones will continue to recognize their partnership and exchange information without having
to re-enter a passcode again.
Unpair Your Phone
Disconnecting a paired device breaks the connection between the device and your phone, but
retains the pairing. At a later point when you wish to reconnect the device, there is no need to
setup the connection information again. Try following sequence if you want to delete a paired
device.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap next to the previously paired device (under the
PAIRED DEVICE section).
3. Tap Unpair.
Note: Disconnections are manually done but often occur automatically if the paired device goes
out of range of your phone or if it is powered off.
Send Items via Bluetooth
Depending on your paired phone's settings and capabilities, you may be able to send pictures,
videos, Contacts information, or other items using a Bluetooth connection.
Note: Prior to using this feature, Bluetooth must first be enabled, and the recipient„s phone must
be visible. If no phones are detected, tap Search for devices to begin a new search.
Send Contact Information
1. Tap > > Contacts.
2. Tap an entry to open its details page.
3. Tap > Share > Bluetooth.
4. Tap a paired phone.
The external Bluetooth phone must be visible and communicating for the pairing to
be successful.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
