13
About Camera
Select [ABOUT CAMERA] option then press ENTER.
Shows camera information.
Change ID Setting
This LKD1000 controller has the controller ID. If you
use 2 controllers or more simultaneously, set the
controller ID for each controller.
1. Select [CHANGE ID] option then press ENTER.
The sub menu will appear.
2. Enter the New LKD1000 ID for this controller
(1 to 16).
3. Press ENTER to save the settings.
Auto Lock Setting
The keys on the controller is locked when there is no
operation for selected duration on the [AUTO LOCK]
option. To release the Key Lock mode, you need to
enter the password.
• NONE: Auto Key Lock function is disable.
• After 1 min: The keys on the controller are locked
when there is no operation for 1 minute.
• After 3 min: The keys on the controller are locked
when there is no operation for 3 minutes.
• After 5 min: The keys on the controller are locked
when there is no operation for 5 minutes.
To Next Page
Loading...
Need help?
General
