24
To activate auto pan
1. Select the [AUTO PANNING] icon and press
ENTER. The sub menu will appear.
2. Select [Run Auto Panning] option then press
ENTER. The sub menu will appear.
3. Press ENTER to activate auto pan.
4. Move the joystick to stop the auto panning.
Pattern Setup and Activation
You will perform the pattern setup and the pattern
play.
Note:
The available patterns differ depending on camera.
So please refer to camera’s manual.
To record the pattern
1. Select the [PATTERN] icon and press ENTER.
The sub menu will appear.
2. Select [Record Pattern] option then press
ENTER.
The sub menu will appear.
3. Use number buttons to select the pattern index
number then press ENTER to confirm.
Pattern recording starts.
4. Perform desired camera operations by moving the
joystick or pressing In/Out buttons.
The following controls are available for recording
the pattern.
• Panning/Tilting/Zoom control (joystick)
• Zoom control (In/Out buttons)
To Next Page
Loading...
Need help?
General
