19
To edit the group
You can create a group using preset positions that
are registered already. A maximum of 9 groups is
available.
1. Select the [PRESET] icon and press ENTER.
The sub menu will appear.
2. Select [Edit Group] option then press ENTER.
The sub menu will appear.
3. Enter the group number (1 to 9) then press
ENTER.
4. Select [Add Preset] or [Delete Preset] then press
ENTER.
5. Enter the preset number that is already registered
and press ENTER.
The preset number is added to the group or delet-
ed from the group.
6. Repeat step 5 to add or delete preset number.
Note:
The group related parameters differ depending on
cameras. So please refer to camera’s manual.
7. Press CLR to exit edit group mode.
To Next Page
Loading...
Need help?
General
