59
CUSTOMIZING SETTINGS
Setting Description
Auto Power Makes the projector turn on automatically when the adaptor plug is
inserted.
Option
On When the DC plug is connected to the projector, it
turns on automatically.
Off When the DC plug is connected to the projector, it
goes into standby mode.
Auto Input
Search
Automatically searches and displays an input signal type when it is
received.
High Altitude If the projector is used at an altitude higher than 1200 meters, turn
this on.
Otherwise, the projector may overheat or its protection function may
be activated. If this happens, turn the projector off and then on again
after waiting for several minutes.
Standby Light Adjusts the LED button indicator.
Option
On When the buttons are touched, their indicators are
all turned on at maximum brightness. In standby
mode, all LED indicators are turned on at 20 % of
the maximum brightness.
Off When the buttons are touched, their indicators are
all turned on at maximum brightness. In standby
mode, all LED indicators are turned off.
DivX(R) VOD Sets DivX related settings.
Initial Setting Resets all the projector settings to the factory default.
Self Diagnosis
Troubleshoots functional problems that can arise while using the
product.
To Next Page
Loading...
