103
INSTALLER SETTING
ENGLISH
Forced operation
• If the product is not used for a long time, the product will be forced to operate to prevent pump
failure and PHEX freezing
• Water pump off After 20 consecutive hours, disable / enable the logic that drives the water
pump by itself
• In the installer setting list, select Forced operation category, and press [OK] button to move to
the detail screen
OK
Type Use Not use
Oper. Cycle 20 hours ~ 180 hours -
Oper. Time 1 min ~ 10 min -
To Next Page
Loading...
Need help?
General