57
ACCESSORIES INSTALLATION
ENGLISH
Following location should be avoid to secure proper operation :
- Height from floor is approximately 1.5 m.
- Thermostat can not be located where the area may be hidden when door is open.
- Thermostat can not be located where external thermal influence may be applied. (such as above
heating radiator or open window)
Thermostat
Thermostat is generally used to control the product by air temperature. When thermostat is
connected to the product, the product operation is controlled by the thermostat.
Installation condition
Before Installation
• USE 220-240 V~ Thermostat
• Some electro-mechanical type thermostat has internal delay time to protect compressor.
In that case, mode change can takes time more than user's expectation. Please read
thermostat manual carefully if the unit does not response quickly.
• Setting temperature range by thermostat can be different with that of the unit. The heating
or cooling set temperature should be chosen within the setting temperature range of the
unit.
• It is highly recommended that the thermostat should be installed where space heating is
mainly applied.
CAUTION
!
Followings should be kept before installation
• Main power must be turned off during installing 3rd party accessories.
• 3rd party accessories should be comply with supported specification.
• Proper tools should be chosen for installation.
• Never do installation with wet hands.
WARNING
!
To Next Page
Loading...
Need help?
General