104
INSTALLER SETTING
ENGLISH
CN_CC
It is the function to set the usage of the unit’s CN_CC port.
• Change setting values using [<,>(left/right)] button
Value Description
D/C Automatic
When power is applied to the product, the unit when the contact point
is on in Dry Contact installed state recognizes Dry Contact installation
D/C Not Installed Do not use (install) Dry Contact
D/C Installed Use (install) Dry Contact
NOTE
!
CN_CC is the device connected to the unit to recognize and control the external contact
point.
To Next Page
Loading...
Need help?
General