78
ENGLISH
SERVICE SETTING
SERVICE SETTING
How to enter service setting
To enter the menu displayed at the bottom, you need to enter the service setting menu as
follows.
• In the menu screen, press [<,>(left/right)] button to select the setting category, and press [OK]
button to move to the setting list.
• In the setting list, select the service setting category, and press [OK] button to move to the
service setting list.
Service setting
• You can set the product service functions.
• Some functions may not be displayed/operated in some product types.
OK
Menu Description
Service contact
Check and input the service center phone number that you can call
when there is service issue.
Model information View product and capacity information
RMC Version Information Check the remote controller model name and software version.
Open Source License View the remote controller’s open source license.
To Next Page
Loading...
Need help?
General