LG V-NET ACS PREMTA000 - Product Direction (General Ventilator)

214
INSTALLER’S SETTING OPTIONS
215
ENGLISH
INSTALLER’S SETTING OPTIONS
● Press and hold ‘wireless remote controller signal receiver part’ of the remote controller for 3
seconds or longer to enter the installer function.
● Select remote controller Celsius control unit setting code value ‘05’.
- You can press ‘▲’, ‘▼’ button to change the code value.
● In value1, use ‘▲’, ‘▼’ button to select product direction setting value, and press ‘Done’ button
to complete the setting.
- If you do not press ‘Done’ button, the setting value will not be applied.
Product direction (General ventilator)
It is the function to set the direction of the ventilation product.
h Product direction setting value
- 01: normal
- 02: reverse
h If there is no button input for about 60 seconds after the setting, it automatically exits from the
setting mode.
h DI/DO may not work in some indoor unit products.
h If there is no button input for about 60 seconds after the setting, it automatically exits from the
setting mode.
Value Setting for Simple Dry contact unit
000 Default – Simple Dry contact Auto identification
001 Simple Dry contact : Not installed
002 Simple Dry contact : Installed
003 Use for digital input