LG V-NET ACS PREMTA000 - LCD brightness in idle

147
ENGLISH
146
USER SETTING
● Press the screen’s Set’ button.
- It moves to the settings menu screen.
● In setting screen, press ‘User’ button.
- It moves to the User Setting screen.
● In User Setting screen, press ‘LCD Brightness In Idle’ button.
- It moves to the Brightness Setting screen.
LCD brightness in idle
This function allows you to adjust the brightness of the remote controller’s standby screen.
USER SETTING
● Press ‘Hide/Show’ button to set the which elements should display on the default screen.
Note that the elements are dependant on the type of unit in operation.
● If you press ‘Back’, ‘Go Back’, or ‘Home’ button, it will exit from the main screen setting
screen.