41
ENGLISH
OPERATION SETTING - Advanced Mode
40
OPERATION SETTING - Advanced Mode
Zone Control
A function to control zone with duct type indoor units.
Wired Remote controller can control maximum 8 zones.
● During the product operation, press the screen’s ‘Zone’ button.
- It moves to the direction of Zone open / close screen.
● Select zone button that you want to control.
● If you press ‘Go Back’ or ‘Home’ button, it will exit from the setting menu.
NOTE
!
according to installation setting value
• If no function is supported
- This entry can not function.
• old type
- Zone control is currently only available to monitor.
• new type(4zone or 8Zone)
- Any number of zones is installed is displayed on the screen can be controlled.
To Next Page
Loading...
