151
ENGLISH
150
USER SETTING
● Press the screen’s Set’ button.
- It moves to the settings menu screen.
● In setting screen, press ‘User’ button.
- It moves to the User Setting screen.
● In User Setting screen, press ‘Schedule Initialization’ button.
Schedule Initialization
It is the function to initialize all timer settings of the remote controller.
USER SETTING
●
In the setting screen, choose the amount of time screen will stay on before it goes into sleep mode
and then press ‘Save’ button to save the setting.
- If you exit without pressing the Save button, your changes will not be applied.
- Your choices are: 15 seconds / 30 seconds / 1 minute / not used.
- Once you press the Save button, it will exit from the setting screen.
● If you press ‘Cancel’, ‘Go Back’, or ‘Home’ button, without pressing 'Save", your changes will
not be applied and the screen will exit.
NOTE
!
If you choose 'not used' as your Screen Saver Timer choice, the LCD will remain on at all
times (will not dim) which will shorten your LCD display lifespan.
To Next Page
Loading...
