21
ENGLISH
TEMPERATURE SETTING - Standard Mode
20
TEMPERATURE SETTING - Standard Mode
Controlling Desired Temperature
● During the indoor unit operation, press the temperature button on the screen.
- It moves to the temperature selection screen.
● Press the remote controller screen’s temperature setting button to set the desired tempera-
ture.
- In cooling, heating, and artificial intelligence And 2setpoint auto mode, you can control the de-
sired temperature.
During the cooling operation
• If the desired temperature is higher than the indoor temperature, cooling is not performed.
• Set the desired temperature below the indoor temperature.
During the heating operation
• If the desired temperature is lower than the indoor temperature, heating is not performed.
• Set the desired temperature higher than the indoor temperature.
TEMPERATURE SETTING - Standard Mode
NOTE
!
According to Control type setting value
• 1Set points
- You can select the desired temperature from 18 °C~30 °C(64~86 °F) for cooling opera-
tion and 16 °C~30 °C(60~86 °F) for heating operation.
• 2Set points
- You can select the desired temperature from 18 °C ~ 30 °C(64~86 °F) for cooling opera-
tion and 16 °C~30 °C(60~86 °F) for heating operation.
* A temperature area of extended range can be selected through desired temperature
range setting option.
- Cooling : 16~37.5 °C (64~99 °F) / Heating : 4~30 °C (40~86 °F)
• The temperature difference between the indoor temperature and the outdoor temperature
is recommended to be 5 °C.(86 °F)
To Next Page
Loading...
