69
ENGLISH
68
OPERATION SETTING - VENTILATION
Air conditioner - Ventilation Control Switching
This function is only used when air conditioner and ventilator are connected to one remote con-
troller.
The function operates to use thermal cooling along with ventilation to provide space comfort.
● Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.
● During the product operation, press the ‘ERV’ tab.
- It switches from the air conditioner mode to the ventilation mode.
● How to switch to the air conditioner mode
- Automatic switching: If no buttons are pressed for 15 seconds or longer in ventilation mode,
it automatically switches to the air conditioner control/monitoring interface.
- Manual switching: If you press the air conditioner Tab in ERV interface, it manually switches.
OPERATION SETTING - Ventilator
SUB FUNCTION SETTING
● The set additional operation is displayed at the top right of the default screen.
NOTE
!
Comfort saving function may not work in some indoor unit products.
To Next Page
Loading...
