LG V-NET ACS PREMTA000 - Control Type Setting(North America Only)

161
ENGLISH
160
USER SETTING
● Press the screen’s Set’ button.
- It moves to the settings menu screen.
● In setting screen, press ‘User’ button.
- It moves to the User Setting screen.
● In User Setting screen, press ‘Control Type’ button.
- It moves to the Control Type Settings screen.
Control Type Setting(North America Only)
It is the function to set GUI type on the remote controller.
* If you want to use in other regions, except North America, does not fit in the environment are
expected to use this feature inconvenient.
We recommend that you use it only in the region (North America).
USER SETTING
● Set the language to use, and then press 'Save'.
- If you exit without pressing the Save button, your changes will not be applied.
- Once the Save button is press, after change value, it will Pop-up window appears.
- After waiting about 5 seconds if you push the reset button on the bottom of the remote control to
reboot the selected language.
* Please refer to “PART DESCRIPTION” section of the manual reset button location.
● If you press ‘Cancel’, ‘Go Back’, or ‘Home’ button without pressing 'Save', it will exit from the
Language setting screen without saving any of the settings.