109
ENGLISH
108
ENERGY
Operation Time Limit
This function is that user can set daily amount target usage.
After setting the daily target value, weekly and monthly targets will be calculated and applied au-
tomatically. (Please refer to the "check energy usage" section of this manual. )
The daily target value is used as the reference value in the graph displays of each period (weekly,
monthly, yearly). (Please refer to the "Alarm Popup" section of this manual.)
● Press the remote controller screen’s ‘Energy menu’ button.
- It moves to the Energy screen.
● In the Energy Saving screen, press ‘Settings’ button.
- It moves to the Energy setting screen.
● In the Energy Saving setting screen, press ‘Operation Time Limit’ from the menu.
- It moves to the Operation Time Limit setting screen.
ENERGY
● In the Target Energy Consumption setting screen, press Disable/Enable button to select
whether to set the target amount.
● Set the energy usage.
- If you touch the box at the bottom of the daily target amount, you can set the energy usage
using the umeric keypad.
- During the daily target amount setting, the weekly target amount and the monthly target
amount are automatically calculated and displayed.
h Weekly target amount: Daily target amount x 7
h Monthly target amount: Daily target amount x 31
● Press the Done button to save the set Target Energy Consumption setting.
- If you exit without pressing the Done button, your changes will not be applied.
To Next Page
Loading...
