11
ENGLISH
OPERATION SETTING – Standard Mode
10
OPERATION SETTING – Standard Mode
● In operation mode selection screen, press the ‘Cool’ button.
- The initial temperature set for cooling operation is 18°C (64°F).
● If you press On/Off button during the use, product operation will stop.
● Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.
● During the operation of the product, press the mode button on the screen.
- The operation mode selection screen is displayed.
General Cooling Operation
Maintains proper cooling comfort
● Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.
● During the operation of the product, press the fan speed button on the screen.
- The fan speed selection screen is displayed.
● During the cooling operation, if you press fan speed ‘+’ button, power cooling is performed
after fan speed ‘HIGH’.
h For some indoor units products, according to whether there is a wind amount function, power
cooling is performed after fan speed ‘POWER’.
● During the cooling operation, if you press fan speed ‘-’ button, power cooling is performed
after fan speed ‘AUTO’.
h For some indoor units products, according to whether there is a fan speed function, power
cooling is performed after fan speed ‘LOW’ or ‘SLOW’.
Power Cooling
It performs a strong cooling in a short period of time.
To Next Page
Loading...
