LG V-NET ACS PREMTA000 - Screen Saver Timer Setting

149
ENGLISH
148
USER SETTING
● Press the screen’s Set’ button.
- It moves to the settings menu screen.
● In setting screen, press ‘User’ button.
- It moves to the User Setting screen.
● In User Setting screen, press ‘Screen Saver Timer’ button.
Screen Saver Timer Setting
This function adjusts the length of time that the screen will stay on before turning off (sleep
mode).
USER SETTING
● Set the desired screen brightness percentage by and press ‘Save’ button to save the setting.
- If you exit without pressing the Save button, your changes will not be applied.
- Your choices are: 0% / 10% / 20% / 30%.
- Once you press the Save button, the screen will exit.
● If you press ‘Cancel’, ‘Go Back’, or ‘Home’ button, without pressing 'Save", your changes will
not be applied and the screen will exit.
NOTE
!
Setting the standby screen brightness to ‘30%’, may degrade LCD's illumination function.