LG V-NET ACS PREMTA000 - Change Temperature; Wireless Module AP mode

FUNCTION SETTING
129
ENGLISH
128
FUNCTION SETTING
● Press the screen’s ‘Set’ button.
- It moves to the settings menu.
● In the settings menu, press ‘Wi-Fi Module AP Mode’ button.
● Press ‘Apply’ button to set the desired state, and then press ‘Back’,
‘Go Back’, or ‘Home’ button, then exit from the setting screen.
NOTE
!
Wireless module AP mode function may not work in some indoor unit products.
Wireless Module AP mode
Wireless Module AP mode function that wireless module change to AP mode.
● Press ‘Cancel’, ‘Go Back’ or ‘Home’ button to exit from the setting screen.
● Conditions
1) Mode: artificial intelligence mode
2) Desired temperature: 22 °C
3) Change temperature: 3
→ Difference of change temperature is 3 °C
● The illustration in this section shows the exam-
ple of operation as set through the conditions in
the example above.
Example of using the change temperature function
h It is the function that can be used only in cooling/heating product.
22°C
25°C
19°C
Temperature[°C]
Time
Cooling changeover
Heating changeover