89
ENGLISH
88
TIMER & PROGRAMTIMER & PROGRAM
● Through the event edit, set the desired controls.
- The Edit button will change to Save, so you can save your control settings.
● Select the day of week and time to set the desired control event.
- Choose the desired day off week, by pressing one of the days of the week buttons. Note that
you can choose only one day of the week at a time.
- Press the left or right arrow keys on the display to scroll the timer. You can also press the
AM/PM button at the top of the screen to switch to morning or evening hours.
- When choosing a time period, you can make choices in half and hour increments (30 minute
time units).
● Set the detail event.
- When setting up a specific time through the weekly schedule screen, start by pressing the up
or down smaller arrows located above and below the "ON" circle as shown below.
- Pressing the center area of the circle, toggles the time On or Off and advances to the next
event (example: mode, temperature, fan speed) as outlined in the flow setting below.
Indoor unit event setting flow : On/Off → mode → temperature → fan speed
On/Off → occupancy → mode → temperature → fanspeed(in 2set
control mode)
* If you select Auto mode in 2set control operating mode in-
creases the desired temperature setting step.(cooling tempera-
ture → heating temperature)
Ventilation event setting flow: On/Off → mode → fan speed
To Next Page
Loading...
