34
SMART APPLICATION FUNCTION
Product network / Register product (Android)
• With the network function enabled on the Robot Cleaner, press “Access" to connect to the
Robot Cleaner.
• Use a 2.4GHz bandwidth.
• Special characters in the ID of the router may hamper product connection or registration.
Tip
1. Long-press the "TURBO(Register/3sec)" button on Roboking for 3 seconds. The [Select AP(Wi-Fi)] screen
will open soon.
2. By selecting your AP on the "Wi-Fi network" list, you will automatically be directed to the product
registration mode.
3. After registration is complete, the [Dashboard] screen will open.
4. With the network function enabled on the Robot Cleaner, press “Robot cleaner image" to connect to Robot
Cleaner.
[Select AP(Wi-Fi)][Press the ‘TURBO’ button] [Register product]
[Registered user list] [Product selection screen - when
connection unavailable]
[Product selection screen - when
connection available]
To Next Page
Loading...
