Liebert GXT4 User Manual

Operation and Display Panel
21 Liebert
®
GXT4
™
UPS Screen
Select MAIN MENU > CONFIGURATION > UPS to enter the UPS screen. This menu has six
screens, as shown in Figure 21.
Figure 21 UPS screens
Press the Up or Down button to move the cursor to the required item, and press the Enter button to
confirm the settings.
Battery Screen
Select MAIN MENU > CONFIGURATION > BATTERY to enter the BATTERY screen. This menu
has four screens, as shown in Figure 22.
Figure 22 Battery screen
Press the Up or Down button to increase or decrease the value of the settings, and press the Enter
button to confirm it.
OFF
AUDIBLE ALARM
NO
STARTUP ON BYPASS
NO
GUARANTEE SHUTDOWN
YES
ENABLE AUTO RESTART
AUTO - BYPASS ENABLE
FREQUENCY SELECTION
230
VOLTAGE SELECTION
0 CABINETS
EXT BATT CABINET
2MINS
LOW BATTERY TIME
8WEEKS
BATT TEST INTERVAL
2014 Y 1 M 1 D
BATT REPLACE TIME

Liebert GXT4 Specifications

General

Form Factor	Tower/Rack Mount
Power Factor	0.9
Battery Type	Sealed Lead-Acid (SLA)
Backup Time	Varies by model and load
Waveform Type	Sinewave
Communication Ports	USB, RS-232
Topology	On-line Double Conversion
Output Frequency	50/60 Hz +/- 0.1 Hz
Typical Recharge Time	3 hours to 90%
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-15°C to 45°C (5°F to 113°F)
Humidity	0-95% non-condensing
Dimensions	Varies by model
Weight	Varies by model
Certifications	UL, cUL, CE, RoHS
Output Voltage	208/220/230/240VAC