Liebert GXT4 - Shut Down the Liebert GXT4

Operation and Display Panel
Liebert
®
GXT4
™
26
TURN ON & OFF screen
Select MAIN MENU -> 3 CONTROL -> 1 TURN ON & OFF to enter the TURN ON & OFF screen.
This screen shows one of two displays, depending on the state of the UPS, as shown in Figure 33.
Figure 33 Turn UPS On or Off screen
ALARM CONTROL screen
Select MAIN MENU -> 3 CONTROL -> 2 ALARM CONTROL to enter the ALARM CONTROL screen,
as shown in Figure 34. This section allows active audible alarms to be silenced. To completely turn
off the audible alarm, refer to CONFIGURATION > UPS as shown in Figure 21.
Figure 34 Alarm Control screen
BATT TEST screen
Select MAIN MENU -> 3 CONTROL -> 3 BATT TEST to enter the BATT TEST screen, as shown in
Figure 35.
Figure 35 Batt Test screen
TURN ON UPS
UPS is Off UPS is On
TURN OFF UPS
TURN ON UPS BYPASS
1 AUDIBLE ALARM ON
2 AUDIBLE ALARM OFF
1START
2 CANCEL
3 BATT TEST RESULT