Liebert GXT4 User Manual

Battery Cabinet
Liebert
®
GXT4
™
42
8.0 BATTERY CABINET
Optional battery cabinets are available for the Liebert GXT4. The external battery connector and
isolation breaker are on the battery cabinet’s rear panel, as shown in Figure 44. For battery cabinet
specifications, refer to Table 15.
Figure 44 Battery cabinet
!
WARNING
Do not contact the external battery connector and ground without wearing protective gloves
and clothing and taking other precautions against electrical shock. The battery loop and AC
input are not insulated, which may cause a dangerous voltage between the external battery
connector and ground.
NOTE
External battery connectors are wired in parallel. Either connector can be connected to the UPS
or to another battery cabinet.
NOTE
The length of the standard battery cable delivered with the battery cabinet is 0.65m (2.13ft).
External Battery
Connector
Isolation Breaker

Liebert GXT4 Specifications

General

Form Factor	Tower/Rack Mount
Power Factor	0.9
Battery Type	Sealed Lead-Acid (SLA)
Backup Time	Varies by model and load
Waveform Type	Sinewave
Communication Ports	USB, RS-232
Topology	On-line Double Conversion
Output Frequency	50/60 Hz +/- 0.1 Hz
Typical Recharge Time	3 hours to 90%
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-15°C to 45°C (5°F to 113°F)
Humidity	0-95% non-condensing
Dimensions	Varies by model
Weight	Varies by model
Certifications	UL, cUL, CE, RoHS
Output Voltage	208/220/230/240VAC