Operator Control and Display Panel
13
2.12 Types of LCD Screens
This section provides a quick guide to the main types of LCD screens.
2.12.1 Opening Display
As the UPS begins powering up, the opening display appears, as shown in Figure 10.
Figure 10 Opening display
2.12.2 Default Screen
After the UPS has powered up and completed a self-test, the output screen appears, as shown in
Figure 11. This window is the default screen.
Figure 11 Default screen
F2 F4F1 F3
HELP
?
F2 F4
HELP
F1 F3
BypassMains Output
L1-N/L2 L2-N/L3 L3-N/L1
L-N voltage (V) 119.8 119.4 119.4
L-N current (A) 0.3 0.5 0.6
Frequency (Hz) 59.97 59.97 59.97
L-L voltage (A) 207.1 206.8 207.1
Power factor 0.00 0.00 0.00
2004-01-22 12:30:36Liebert NXb
Single Normal30kVA-3X3
Fault reset 01-22 10:32
Manual turn on 01-22 10:32
Normal mode 01-22 11:05
To Next Page
Loading...
