EL0021a2
EL0021a
1
2
3
4
5
6
7
8
9
10
F1
F2
UOMOPRESENTE
SEMIAUTOMATICO
AUTOMATICO 2 PASSI
BLACH-OUT
AUTOMATICO 4 PASSI
CONDOMINIALE
PRELAMPEGGIO
LAMPEGGIO IN PAUSA
FOTO 1
CHIUDE PASSANDO
FOTO TEST
COLPO D`ARIETE
LUCE DI CORTESIA
RALL APERTURA
APERT. PEDONALE
FORZA
TEMPO PAUSA
RALLENTAMENTO IN CHIUSURA
SENSIBILITA` MOTO
EL0021a1
EL0021a1
1
2
3
4
5
6
7
8
9
10
F1
F2
UOMOPRESENTE
SEMIAUTOMATICO
AUTOMATICO 2 PASSI
BLACH-OUT
AUTOMATICO 4 PASSI
CONDOMINIALE
PRELAMPEGGIO
LAMPEGGIO IN PAUSA
FOTO 1
CHIUDE PASSANDO
FOTO TEST
COLPO D`ARIETE
LUCE DI CORTESIA
RALL APERTURA
APERT. PEDONALE
FORZA
TEMPO PAUSA
RALLENTAMENTO IN CHIUSURA
SENSIBILITA` MOTO
b) Simultaneously press and hold down and
and switch on the power supply to the system to light
the third LED.
c) Release keys and , the two red LEDs will now
ash.
EL0028
EL0028
1
2
3
4
5
6
7
8
9
10
F1
F2
UOMOPRESENTE
SEMIAUTOMATICO
AUTOMATICO 2 PASSI
BLACH-OUT
AUTOMATICO 4 PASSI
CONDOMINIALE
PRELAMPEGGIO
LAMPEGGIO IN PAUSA
FOTO 1
CHIUDE PASSANDO
FOTO TEST
COLPO D`ARIETE
LUCE DI CORTESIA
RALL APERTURA
APERT. PEDONALE
FORZA
TEMPO PAUSA
RALLENTAMENTO IN CHIUSURA
SENSIBILITA` MOTO
PHASE 4
CARD INITIALISATION
PHASE 5
a) Identication of closure stop plate leaf 2.
Give the step command (A) holding it down until the
leaf (2) reaches and pushes for a few seconds against
the closure stop plate. When the leaf (2) has identied
the closure stop plate the red LED (DX) only remains lit.
b) Identication of stop plate leaf 1.
Give the step comman (A) again, holding it down
until leaf 1 reaches and pushes for a few seconds
against the closure stop plate.
If the closure stop plates have been correctly
identied, the red LED sonlyremain lit on the control
unit.
EL0021e
EL0021e
1
2
3
4
5
6
7
8
9
10
F1
F2
UOMOPRESENTE
SEMIAUTOMATICO
AUTOMATICO 2 PASSI
BLACH-OUT
AUTOMATICO 4 PASSI
CONDOMINIALE
PRELAMPEGGIO
LAMPEGGIO IN PAUSA
FOTO 1
CHIUDE PASSANDO
FOTO TEST
COLPO D`ARIETE
LUCE DI CORTESIA
RALL APERTURA
APERT. PEDONALE
FORZA
TEMPO PAUSA
RALLENTAMENTO IN CHIUSURA
SENSIBILITA` MOTO
PHASE 6
IDENTIFICATION OF STAGGERING AND
OPENING STOP PLATE
a) Give the step command (A) and release, the leaf (1)
will open. When it reaches the point at which one
also wishes to open leaf (2) (opening staggering) give
the step command (A) and release: leaf (2) will open.
b) The two leafs will now continue to open until they reach
and push against the opening stop plates for a
few seconds. If the opening stop plates have been
correctly identied, the red LEDs only remain lit on
the control unit.
EL0021a2
EL0021a
1
2
3
4
5
6
7
8
9
10
F1
F2
UOMOPRESENTE
SEMIAUTOMATICO
AUTOMATICO 2 PASSI
BLACH-OUT
AUTOMATICO 4 PASSI
CONDOMINIALE
PRELAMPEGGIO
LAMPEGGIO IN PAUSA
FOTO 1
CHIUDE PASSANDO
FOTO TEST
COLPO D`ARIETE
LUCE DI CORTESIA
RALL APERTURA
APERT. PEDONALE
FORZA
TEMPO PAUSA
RALLENTAMENTO IN CHIUSURA
SENSIBILITA` MOTO
5
a) Switch off power supply.
CLOSURE STOP PLATE IDENTIFICATION
2 MAN.ISTRUZ.GE UNI24R (GB).indd 5 30-10-2008 16:40:50