Install Pedals
1. Pay attention to the side the pedals are installed on. The right and left sides are
determined while sitting in a normal riding position. The pedals are marked R for right
and L for left.
2. The Right side pedal is screwed in the normal clockwise tightening direction.
3. The Left side pedal is screwed in the opposite counterclockwise direction.
4. Using the 15 mm supplied wrench, tighten the pedals.
5. Attach the pedal straps.
Water Bottle Holder
1. Line the water bottle holder up with holes just below handlebar and install the 2 Phillips
Head Screws (A8)
2. Securely tighten both screws
14
To Next Page
Loading...
Need help?
General
