ORPHEUS User’s Manual
10 support@lightcon.com Light Conversion
7. Limit access to the laser system to qualified personnel only, who have received appropriate
safety laser training and are aware of dangers involved.
8. Use the laser system in a closed room. Laser light remains collimated over long distances and
therefore presents a potential hazard if not confined.
9. Do not work with ORPHEUS cover opened unless necessary. Intense light beams, their specular
and scattered reflections can be emitted from various parts of ORPHEUS when the cover is
opened.
10. Always keep the ORPHEUS powered for the safety beam shutter to operate correctly.
11. Post warning signs near the laser operation area.
1.2 Electrical Safety
1. Disconnect the power supply when working on any electrical equipment when it is not
necessary for the equipment to be operating.
2. Do not connect or disconnect any cables with the power supply connected to the mains
electricity.
3. Never work on electrical equipment unless there is another person nearby who is familiar with
the operation and hazards of the equipment, and who is competent to administer first aid.
4. The equipment must only be connected to a mains electricity with protective earth to avoid risk
of electrical shock.
To avoid the risk of electrical shock, this equipment must
only be connected only to a mains electricity with protective
earth.
1.3 Warning and Information Labels
Description of ORPHEUS labels is presented in Figure 1 and Table 2.
Figure 1. Location of the labels on the ORPHEUS body
To Next Page
Loading...