ORPHEUS User’s Manual
Light Conversion support@lightcon.com 29
5.10 Computer Control of ORPHEUS
ORPHEUS is controlled through a USB interface of a computer and dedicated WinTopas4 software
package. WinTopas4 should be installed by a field service engineer during the set-up of the system. You can
find a last configuration backup in a USB memory stick, provided with the system user’s manual:
• 18000_Configuration.zip – device configuration files (where “17000” is a serial number of the
device). Download the latest version of WinTopas4 installer from “Light Conversion” website.
• WinTopas4-preconf(18000)-setup.exe (optional) – preconfigured installer, consisting of all system
devices configuration files and WinTopas4 software. No separate WinTopas4 installation is
required.
For more information, downloads, tutorial videos and instructions please visit WinTopas4 info page:
topas4info.lightcon.com
Control of the ORPHEUS can also be integrated into the user’s software. For more information please
visit Topas4 Public API help page:
topas4api.lightcon.com/current
If you experience problems with the software, please contact:
support@lightcon.com
To Next Page
Loading...