Light Conversion ORPHEUS - 2. ELECTRICAL AND PHYSICAL SPECIFICATIONS; 2.1 Dimensions; 2.2 Description of Input and Output Ports

ORPHEUS User’s Manual
12 support@lightcon.com Light Conversion
2. ELECTRICAL AND PHYSICAL SPECIFICATIONS
For indoor use only!
ORPHEUS is powered by external power supply provided by the manufacturer. Contact “Light
Conversion” support team before using a power supply from other manufacturers.
Table 3. Electrical and utility requirements
Power requirements (external power supply)
Voltage: 100–240 VAC
Frequency: 50/60 Hz
Max. current: 1.6 A
Power requirements (control board)
Voltage: 24 VDC
Max. current: 5 A
Altitude
Up to 2500 m
Operating temperature
15-40 °C
Relative humidity
10-70 % (non-condensing)
Table 4. Physical specifications
Length
590 mm
Width
230 mm
Height
163 mm
Weight
16 kg
Input/output port height
125 mm
Optical beam path length*
2.3 m
* From the input to the output port.
2.1 Dimensions
* Wavelength separator not pictured
Figure 2. ORPHEUS housing dimensions and positions of input and output ports (mm)