Lighthouse ApexZ Series - Select Data Records

Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R3 103
Select data records
Select a single record
To select a single data record on the
Data Screen, press the data record
and it will highlight blue to
indicate it has been selected.
Press the same record again
and the blue highlight will be
removed, indicating that the record
is no longer selected.
Select multiple records
While a selected data record
is highlighted blue.
Touch another record above
or below that record.
The records between the first
highlighted record and the second
selected record will also be
highlighted blue and included in the
complete data selection.
Data Screen
Data Screen
2
1
2
1