Lighthouse ApexZ Series - Usb

Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R3 46
USB
USB Options
The USB Options screen allows the user to select how to format data exported to USB. Data can be
exported to USB as .csv (comma separated value) or .lsdx (Lighthouse Secure Data) files. The format for
particle data can be set to Raw or Normalized; cubic feet, cubic meters or liters. The user may also
select to output data records to USB on every sample, every alarm, or both.
Output File Format, On Sample, On Alarm
Select .csv or .lsdx file format
Select Output on Sample and or
On Alarm.
Disabled Enabled
Select Data Format: Raw and/or Normalized.
Select Normalized Units: ft
3
, m
3
, L.
Note: The User may enable both output “On
Sample” and output “On Alarm”. (This will output
to USB every sample and every alarm record).
Configuration: USB Screen
Enabled Disabled
2
3
1
4
Note: If the user selects Output to .lsdx then no
Data Formatting will be applied.