Lighthouse ApexZ Series - Wi-Fi

Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R3 37
Wi-Fi
Enable Wi-Fi
Press the Wi-Fi Enable button
to enable Wi-Fi.
Press the + button to
Configure one to five
Wi-Fi connections.
Press the Scan button to search for
available Wi-Fi networks or
routers in the area.
Press and select a Wi-Fi network for
your ApexZ communication.
After a Wi-Fi has been selected ApexZ
will mark with a red dot the
remaining required configuration tabs
to complete the configuration.
Scan for Wi-Fi
2
3
1
4
Configuration: Wi-Fi Screen
WIFI 1
Enterprise Wi-Fi
Wi-Fi – No Security
Manual
5
Open Wi-Fi configurations:
Security will be preset to “None”.
Enterprise Wi-Fi configurations:
Security will be preset to WPA-EAP.
Server Certificates are accepted but not required.
Username input is required.
Password input is required.
Local Network Wi-Fi:
Security will be preset to WPA-PSK.
Password input is required.