Lighthouse ApexZ Series - Update Firmware

Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R3 31
Update Firmware
To update the instruments firmware make sure the firmware upload file is copied on a USB key and then
follow these steps.
Insert the USB key with FW Upload File
Press the Update button to display
the Firmware Update Screen.
Update Firmware
Press the green check box to Update the Firmware
or press the red x button to Cancel and no update.
Update Firmware – Confirmation
Press the green check box to confirm FW update
or press the red x button to Cancel and no update.
ApexZ will reboot. After reboot the USB key may be removed.
Instrument: Maintenance Screen
Firmware Update Screen
Note: If no USB is connected Export,
Import and Update will be disabled.
Instrument Maintenance Screen
Firmware Update Confirmation Screen
2
3
1
4
5
Update
Update
Cancel
Update
Cancel