Lighthouse ApexZ Series - Print

Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R3 45
Print
Print Options
The Print Options screen allows the user to setup how printouts will be formatted. Users can set data
formats to Raw or Normalized, Cumulative or Differential and choose the normalized unit of measure
(cubic feet, cubic meters or Liters). Statistics can also be enabled to print on reports. These include:
Mean, Minimum, Maximum, Standard Deviation, Standard Error and 95% UCL.
Data Format
Enable or Disable data formats:
Select Cumulative/Differential
Select Raw or Normalized
Select Normalize Units ft
3
, m
3
, L
Statistics
Enable/Disable printing statistics:
Mean
Minimum
Maximum
Std. Dev.
Std. Error
95% UCL
Formatting
Enable/Disable printing:
Model
Serial #
Calibration Date
Username
Tag
Separator
Output On Sample, On Alarm
If Output on Sample is enabled each record
will be printed when the sample is complete.
If Output on Alarm is enabled the alarm data will be printed
every time an alarm is recorded.
Font Size
Enable Large font or smaller font.
Configuration: Print Settings Screen
Note:
Green buttons indicate active options.
Red buttons indicates inactive options.
Disabled Enabled
Note: The User may enable both output “On Sample”
and “On Alarm” (this will output to the printer on
every sample and on every alarm record).
1
2
3
4
5