Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R3 32
Instrument Settings Reset
Instrument Settings
Press the Instrument Settings Reset button
to display the Settings Reset Screen.
Reset Instrument Settings
Press the green check button to RESET the instrument settings
or press the red x button to cancel.
Instrument Settings that will be reset:
Instrument Settings:
Users enabled/disabled, volume, brightness, decimal mark, digit grouping,
date, time, time zone, daylight savings time.
View Settings:
Data table, Histogram, History, Graph, and Environmental view settings.
Connectivity Settings:
Ethernet enabled/disabled, IP, Subnet, DHCP enabled/disabled Wi-Fi enabled/disabled, print output
settings, USB output settings.
Print Options:
Data Raw or Normal, Data Cumulative or Differential, Statistics (mean, minimum, maximum, standard
deviation, standard error, 95% UCL), Formatting (model, serial #, calibration date, user name, tag,
separator, company, address), Output (on sample, on alarm), font size.
Zero Count Settings:
Zero count enabled/disabled, Zero count sample time. Zero count delay.
Pump Startup:
Pump start up enable/disabled.
Instrument: Maintenance Screen
To Next Page
Loading...
