Lighthouse ApexZ Series - Import Configuration

Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R3 30
Import Configuration
ApexZ can import it’s configuration from a file on a USB key. This configuration file can be imported
from a backup copy or it can be imported as a clone of another ApexZ instrument configuration (see
Export Configuration).
Import Configuration
Insert USB stick into the ApexZ USB port.
Press the Import button to display
the Select File to Import screen.
Select a saved configuration file to import
from the USB stick.
Press the green Save button to display the Import
Configuration pop up screen.
Press the green check box to Import the Configuration into ApexZ.
Or press the red x to cancel.
Note: When no USB is connected Export,
Import and Update will be disabled.
Instrument: Maintenance Screen
Select File to Import Screen
WARNING: Importing a configuration file will replace the ApexZ’s current
configuration entirely. Do Not pull the USB stick out during operation.
Import Configuration
Note: Importing Configuration will replace all current configuration settings.
2
3
1
4
5
Import
Import
Cancel