Lighthouse ApexZ Series - Installing the Battery

Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R3 4
Installing the battery
Insert battery 1 into the lower battery slot.
Insert battery 2 into the upper battery bay.
You will feel a slight pressure and clicking as the battery seats
down fully in the battery bay.
Close the battery door.
Tighten down the
battery door screw.
Note: ApexZ has dual battery slots and can operate with either one
or two batteries installed. With two batteries installed both
batteries will self-adjust and drain their charge evenly together.
3
2
1
1
2
4
2
1