Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R3 5
Hot swapping the batteries
ApexZ will allow the user to remove one battery while the instrument is powered on and
sampling. This allows the user to continue to sample with one battery while recharging the
second battery. A charged second battery may then be reinstalled into the instrument while
ApexZ is still sampling.
Hot swapping allows the user to install a newly charged
battery and then remove a low charged battery while
the instrument is sampling under battery power.
Use the optional battery charger (part #: 017789752
single battery charger, or part #: 017789753 dual
battery charger) to charge batteries outside of the
ApexZ instrument.
Batteries inserted into ApexZ will always charge while
ApexZ is plugged into the AC power with the AC power
adapter and power cord.
Charging the batteries outside of ApexZ
See optional Dual Bay Desktop Charger for charging up to 2
ApexZ batteries at the same time. Batteries not included.
WARNING: Only use batteries provide with the ApexZ by
Lighthouse Worldwide Solutions. Use of unauthorized
batteries may cause damage to equipment, void
warranty, and pose a threat to safety.
To Next Page
Loading...
