Lightware DVI-HDCP-TPS-TX210 - 8.6. Command Line Interface (CLI)

  


Click on the Start Update button to start the procedure. The status is shown in


Parameters window (or it is incorrect)

 
e

Done




START UPDATE
Command Line Interface (CLI)
DIFFERENCE:  

    

How to Run
Running under Windows
®
OS

LightwareDeviceUpdaterV2_CLI.cmd

or test the features directly.
Step 1. 
c:\Program Files (x86)\Lightware\Lightware Device Updater V2\LightwareDeviceUpdaterV2_CLI.cmd .
Step 2.  cmd.exe and press enter. The

Step 3. Now you can use the LightwareDeviceUpdaterV2_CLI.cmd

Running under Linux

LightwareDeviceUpdaterV2.sh.

bash LightwareDeviceUpdaterV2.sh update --ip 172.24.5.27 --package ~/Downloads/tps-
tx200_1.3.1b3.lfp2
        
®
      
examples with LightwareDeviceUpdaterV2_CLI.cmd.



