Lightware DVI-HDCP-TPS-TX210 - Setting the delay of the dark mode setting; Identifying the device; Toggling the dark mode setting; Control lock

  

Control Lock

Command and Response #lockbutton #buttonlock
ç 
æ 
Parameters
   
 Front panel button

0
None: all functions of the front panel button are enabled.
1
The front panel buttons are locked but can be unlocked
Forced
 section
2
The front panel buttons are locked and cannot be


Example
ç 
æ 
Identifying the Device

Command and Response #identifyme
ç 
æ 
Example
ç 
æ 
Toggling the Dark Mode Setting

 #darkmode
Command and Response
ç 
æ 
Parameters
If the  parameter is true (or 1), the Dark mode function is enabled, if the parameter is false (or 0),
the function is disabled.
Example
ç 
æ 
Setting the Delay of the Dark Mode Setting


function of the button itself. The delay time can be set by this command.
Command and Response
ç 
æ 
Parameters
The 
the Dark mode can be enabled immediately by the DarkModeEnable property. This delay has an affect to the
wakeFromDarkMode method as well.
Example
ç 
æ 



