Lightware DVI-HDCP-TPS-TX210 - Video Outputs (TPS and HDMI)

  

Video Outputs (TPS and HDMI)
Port Properties Window of the TPS Video Output
Available settings:
▪ 
▪ 
▪ Autoselect settings
The Autoselect Feature section). #signaltype
▪ Signal type
Auto

▪ HDCP mode
content allows when Auto mode is selected. #hdcp
▪ Power 5V mode

▪ TPS mode
the  section. #tpsmode
▪ Connected source #new
▪ No sync screen
 section.
▪ Open the Frame Detector.
▪ Open the  tool.
▪ 



