Upload the Settings to a Device (Restore)
WARNING! Please note that the settings will be permanently overwritten with the restored parameters
in the device. Withdrawal is not possible.
ATTENTION!
device as the destination device.
The Restoring Process
Step 1. SettingsBackup tab from the menu.
Step 2. Click on the Choose lebrowse
Step 3.
Step 4. Choose IP settings
Step 5. MAC lter settings
feature in the MAC Filter Allowlist section.
Step 6. Start restore process button and click on the Yes button when asked.
Step 7.
Create and Restore Backups from the Device Memory
▪ without protection:
▪ with protection:
The presets can be used for the macros as well, please see the Macros section.
WARNING! Loading factory default settings will erase all presets in the device memory!
to the selected slot without
protection
to the selected slot with a
password
To Next Page
Loading...
