EasyManua.ls Logo

Lightware UCX-4x2-HC30 - Set the USB Autoselect Policy; Set the Followed Video Port to Autoselect; Change the Autoselect Included USB Ports; Change the USB Port Priority

Lightware UCX-4x2-HC30
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
 UCX series – User's Manual 120

Set the USB Autoselect Policy
DIFFERENCE: 
Command and Response
ç SET·<op_mode>
æ pw·<op_mode>
Parameters
Parameter Parameter description  
<op_mode> Operation mode
Off
The autoselect function is disabled.
Last Detect
Always the last attached input is switched to
the output automatically.
First Detect

Follow video
Follows the video crosspoint state
automatically.
Example
ç 
æ 
Set the Followed Video Port to Autoselect
Command and Response
ç SET·/V1/MEDIA/USB/AUTOSELECT/H1.VideoFollowPort=<out>
æ pw·/V1/MEDIA/USB/AUTOSELECT/H1.VideoFollowPort=<out>
Example
ç 
æ 
Change the Autoselect Included USB Ports
DIFFERENCE: 
Command and Response
ç SET·/<host>.Included=<state>
æ pw·/<host>.Included=<state>
Parameters
Parameter Parameter description  
<host> USB Host
U1-U4
USB-C and USB-B port number
<state>
The chosen input is ignored from the
autoselect process or not.
true
The port is included in autoselect.
false
The autoselect function ignores that port.
Example
ç 
æ 
Change the USB Port Priority
DIFFERENCE: 
Command and Response
ç SET·/<host>.Priority=<prio_num>
æ pw·/<host>.Priority=<prio_num>
Parameters
Parameter Parameter description  
<host> USB Host
U1-U4
USB-C and USB-B port number
<prio_num>
Priority number from 1 to 100, equal
numbers are allowed.
1-100
1: the highest priority
100: the lowest priority
Example
ç 
æ 

Table of Contents

Related product manuals