Lightware UCX-4x2-HC30 - Set the Followed Video Port to Autoselect; Change the Autoselect Included USB Ports; Set the USB Autoselect Policy; Setting the 5 V Sending to the USB Peripherals

 UCX series – User's Manual 87

Setting the 5V Sending to the USB Peripherals

Request and Response
ɯ  <ip><device_id>
ɯ body: <device_pwr>
ɮ header: 200 OK
ɮ body: <device_pwr>
Parameters
Parameter Parameter description  
<device_id> USB A-type port
D1-D4
Downstream port number
<device_pwr> 
Auto

power sending.
Off

downstream port
Example
ɯ  
ɯ body: Auto
ɮ header: 200 OK
ɮ body: Auto
Set the USB Autoselect Policy
Request and Response
ɯ  <ip>
ɯ body: <op_mode>
ɮ header: 200 OK
ɮ body: <op_mode>
Parameters
Parameter Parameter description  
<op_mode> Operation mode
Off
The autoselect function is disabled.
Last Detect
Always the last attached input is switched to
the output automatically.
First Detect

Follow video
Follows the video crosspoint state
automatically.
Example
ɯ  
ɯ body: Follow video
ɮ header: 200 OK
ɮ body: Follow video
Set the Followed Video Port to Autoselect
Request and Response
ɯ  <ip>
ɯ body: <out>
ɮ header: 200 OK
ɮ body: <out>
Example
ɯ  
ɯ body: O1
ɮ header: 200 OK
ɮ body: O1
Change the Autoselect Included USB Ports
Request and Response
ɯ  <ip><host>
ɯ body: <state>
ɮ header: 200 OK
ɮ body: <state>
Parameters
Parameter Parameter description  
<host> USB Host
U1-U4
USB-C and USB-B port number
<state>
The chosen input is ignored from the
autoselect process or not.
true
The port is included in autoselect.
false
The autoselect function ignores that port.
Example
ɯ  
ɯ body: false
ɮ header: 200 OK
ɮ body: false



