2. Product Overview UCX series – User's Manual 15
Rear View
UCX-2x1-HC30
UCX-2x2-H30
UCX-4x2-HC30
UCX-4x2-HC30D
1 3 4 5 6 7 8 9 q2
1 3 4 5 6 7 8 92
RS-232
DC IN
24V 5A
GPIO
Tx1 Rx1
L R
USB-AUSB-A
AUDIO OUT
OCS
SENSOR
IN
ETHERNET 1 ETHERNET 2
HDMI
OUT 1 OUT 2
HDMI
1
2
3
4
2
3
4
5
6
1
5V
24V
Tx2 Rx2
CONTROL LAN
SECURE
AV LAN
UTILITY
1 2 3 4 5 6 7 8 9 q
1 2 3 4 5 6 78 9 q
w
1
DC Input
output to the 2-pole Phoenix
®
connector. For more info about the powering,
see Powering Options section.
2
USB-A Port Downstream ports for connecting USB peripherals (e.g. camera, keyboard,
multitouch display) with USB 3.1 Gen1 data speed.
3
HDMI Output Ports HDMI output ports for connecting sink devices.
4
Video Output Status
LEDs
See the details in section.
5
Analog audio port 5-pole Phoenix
®
connector for balanced analog audio output signal. The
signal is de-embedded from the selected video signal.
6
RS-232 port 3-pole Phoenix connector for bi-directional RS-232 communication. #new
7
OCS sensor connector 3-pole Phoenix
®
connector (male) for connecting an occupancy
OCS Connector section.
8
GPIO
8-pole Phoenix
®
GPIO - General Purpose
section.
ATTENTION! Occupancy sensor connector and GPIO port are not
compatible with each other because of the voltage level difference, please
do not connect them directly. #new
9
Secure Control LAN
q
Utility AV LAN
RJ45 connector provides room utility Ethernet connection for e.g BYOD
laptops.
w
Dante
®
Audio Output
RJ45 connector for de-embedding the HDMI audio which can be
transmitted as a 2-channel Dante
®
or AES67 source.
WARNING! Always use the supplied power supply. Warranty void if damage occurs due to use of a
different power source.
To Next Page
Loading...
