UCX series – User's Manual 94
Network Security
Enable/Disable Ethernet Port
Request and Response
ɯ <ip><ethernet_port>
ɯ body: <status>
ɮ header: 200 OK
ɮ body: <status>
Parameters
Parameter description Parameter values
<ethernet_port> Ethernet port number
P1-P5*
<status> The port is enabled.
The port is disabled.
true
false
*The UCX-2x1-HC30 model has three Ethernet port (P1-P3).
Example
ɯ
ɯ body: false
ɮ header: 200 OK
ɮ body: false
Request and Response #http #https
ɯ <ip><port>
ɮ header: 200·OK
ɮ body: <port_num>
Parameters
Parameter description Parameter values
<port> Port type
HTTP
HTTPS
LW3
SERIAL1
SERIAL2
<port_num> Port number
80
443
6107
8001
8002
Example
ɯ
ɮ header: 200 OK
ɮ body: 80
Enable/Disable Network Service Port
Request and Response
ɯ <ip><port>
ɯ body: <status>
ɮ header: 200 OK
ɮ body: <status>
Parameters
Parameter description Parameter values
<port> Port type
HTTP
HTTPS
<status> The port is enabled.
The port is disabled.
true
false
Example
ɯ
ɯ body: false
ɮ header: 200 OK
ɮ body: false
INFO: UCX series deal with one user for authentication and the username (admin) can not be changed.
Request and Response
ɯ <ip>
ɮ header: 200·OK
ɮ body: admin
Example
ɯ
ɮ header: 200 OK
ɮ body: admin
To Next Page
Loading...
Need help?
General
